Setra System SRPM - Manual (Page 16)

16
Press Save and Exit.
DATA ENTRY SCREEN
Enter numbers by pressing each key in sequence until the desired
character is displayed in the data entry box above the keypad. (Note:
The cursor will blink for one to two seconds then stop and display the
character.) Erase any mistakes by using the “Back Space” key. When
fi nished entering data, press the “Enter” key to return to SETUP UNIT
screen.
Note: Use the eraser end of a pencil or back-end of a pen to press (or
tap) box on screen to increase accuracy of inputs.