ROTRONIC HygroLab - Manual (Page 46)

IN-E-HyLab-V4_11
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Instruction Manual
Document Type
HygroLab bench top indicator version 4:
instruction manual
Document title
Page 46 of 51
© 2006; Rotronic AG IN-E-HyLab-V4_11
When ready to measure:
1. Press on the ENTER key on the keypad of the HygroLab 3. The display shows:
Note: the numerical values are for illustrative purposes only.
0. 2 9 5
A w
2 4. 8 3 ° C
E 1 0 0 : 0 0 : 0 0 R
After 60 seconds, the trend indicators appear both for humidity and temperature. Two arrows mean
stable signal, as per the settings defined when entering the AwE mode :
0. 6 8 4
A w
2 4. 8 6
° C
E 1 0 0 : 0 1 : 0 0 R
Upon reaching and holding equilibrium for a few minutes, the HygroLab beeps once and freezes
the display. Black rectangles to the left of the display indicate that the measurement is ended.
0. 9 3 5
A w
2 4. 8 8 ° C
E 1 0 0 : 0 1 : 0 0 S
Measurement ended
probe 1
is being displayed
elapsed time
hh:mm:ss
HygroLab is in the AwE mode
AwE mode is
current
temperature value
current
humidity value