ROTRONIC MBW 473 - Manual (Page 14)

10 MBW473_MANUAL_E_V2.0
3.2 Back Panel
Power Switch
The main power switch is on the back panel above the power plug. The power supply has a built-in
fuse and will automatically switch off in case of overload. To restart power, the main power switch
must be switched off and on again.
Power Plug
The supplied power cord is connected to the power socket on the instrument back panel. The sup-
ported power supply voltage is 100-120 VAC / 200-240 VAC at 50 to 60Hz. The power requirements
are specified on the serial number label on the back of the instrument.
RS-232
The RS-232 port can be used to connect the 473 to a desktop or laptop computer. The necessary 9-
pin RS-232 (serial) extender cable is a common accessory and can easily be obtained at any comput-
er store.