NORD Drivesystems B2050 - Manual (Page 5)

1. Notes
www.nord.com B2050-GB-0613 -5-
1.4 Safety information
All work including transportation, storage, installation, electrical connection, commissioning,
servicing, maintenance and repair must be performed only by qualified specialist personnel.
It is recommended that repairs to NORD Products are carried out by the NORD Service
department.
Danger!
Installation and maintenance work must only be performed when gear units are at a
standstill and have cooled down. The drive must be isolated and secured to prevent
accidental start-up.
Tighten the drive elements or secure the parallel key before switching on.
Observe all safety information, including that provided in the individual sections of this
Operating Manual. All national and other regulations on safety and accident prevention must
also be observed.
Danger!
Serious physical and property damage may result from inappropriate installation, non-
designated use, incorrect operation, non-compliance with safety information,
unauthorised removal of housing components or safety covers and structural
modifications to the gear unit.
1.5 Other documents
Further information may be obtained from the following documents:
 Gear Unit Catalogue (G1050)
 Operating and maintenance instructions for the electric motor
 If applicable, the operating instructions for options and drive units which are fitted or
provided.
Danger!
All work including transportation, storage, installation, electrical connection,
commissioning, servicing and maintenance must be performed in a non-explosive
atmosphere.