NORD Drivesystems B2050 - Manual (Page 18)

3. Assembly instruction,
storage, transport, preparation, installation
-18- B2050-GB-0613 www.nord.com
Figure 3-8: Applying lubricant to the shaft and the hub
Note!
The gear unit can be fitted to shafts with and without a shoulder using the fastening
element (Option B). Tighten the bolt of the fastening element to the correct torque. (See
Chapter 6.4 for torque values)
Figure 3-9: Fasten the gear unit to the shouldered shaft using the fastening element
Figure 3-10: Fastening the gear unit to a shaft without a shoulder using the fastening element
A gear unit can be dismantled from a shaft with shoulder using the following device, for example.
Figure 3-11: Dismantling