NORD Drivesystems B2050 - Manual (Page 4)

1. Notes
-4- B2050-GB-0613 www.nord.com
1. Notes
1.1 General information
Read the Operating Manual carefully prior to performing any work on or putting the gear unit into
operation. Strict compliance with the instructions in this Operating Manual is essential. This
Operating Manual and all associated special documentation must be kept in the immediate
vicinity of the gear unit.
Getriebebau NORD accepts no liability for damage to persons, materials or assets as a result of
the non-observance of this Operating Manual, operating errors or incorrect use.
If additional components are attached to or installed in the gear unit (e.g. motor, cooling
system, pressure sensor etc.) or components (e.g. cooling system) are supplied with the
order, the operating instructions for these components must be observed.
If you do not understand the contents of this Operating Manual or additional operating
instructions, please consult Getriebebau NORD!
1.2 Safety and information symbols
Please always observe the following safety and information symbols!
Danger!
Risk of fatalities and injury
Attention!
Machine may be damaged
Note!
Useful information
Danger!
Important information regarding explosion protection
1.3 Correct use
These gear units generate a rotational movement and are intended for use in commercial
systems. They satisfy the explosion-proof requirements of Directive 94/9EG (ATEX100a) for the
product category indicated on the name plate.
Strict compliance with the technical data on the name plate is essential.
The documentation must be observed.
Appropriate safety measures must be taken for applications where failure of a gear unit or
geared motor may result in injury.
Only components which comply with the applicable regulations of Directive 94/9/EU may be
fitted and operated.