West Control Solutions D280-1 - Manual (Page 10)

3 Operation
3.1 Front view
1 measured value display
2 statuses of switching outputs OuT.1... 3 (or alarm statuses)
3 lit with self-tuning activated
4 lit with tare or sample & hold function activated
5 lit with entry in the error list
6 function-key
7 down-key
8 up-key
9 enter-key: calls up extended operating level/ errorlist
0 pc connection for BlueControl (engineering-tool)
g
The measured value is displayed as standard. At parameter setting, configuration,
calibration level and at the extended operating level, the display changes
cyclically between parameter name and parameter value.
3.2 Behaviour after power-on
After supply voltage switch-on, the unit starts with the operating level.
The unit is in the condition which was active before power-off.
Operation
10 Front view Digital 280-1
F
FUNC
ADA
OUT1
OUT2
OUT3
ERR
min max
Digital 280-1
2
3
4
5
6
1
0
9 8 7