Thermo Fisher Scientific CyberScan CON 400 (For units manufactured from March 2010 onwards) - Manual (Page 8)

Instruction Manual CON 400
- 2 -
2 DISPLAY AND KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display.
• The primary display shows the measured conductivity or TDS reading.
• The secondary display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
See Figure 1.
SETUP MEAS CAL MEM
Primary Display
Secondary Display
MEM
ERR
AM PM
ATC
°C °F
READY
HOLD
ON
OFF
-8.8.8.8
-1.8.8.8
1 2 3 4
5
6
7
8
9
10 11
12
13 14 15
16
17
18
19
20
mS
ppt
ppm
μ
S
K =
Figure 1: Full LCD Screen
1. SETup mode indicator 8. parts per million indicator 15. Probe indicator
2. MEASurement mode indicator 9. Temperature indicator 16. Calibration solution indicator
3. CALibration indicator 10. Automatic Temperature
Compensation indicator
17. Cell constant indicator
4. MEMory recall mode indicator 11. Clock indicator 18. ON / OFF indicator
5. millisiemens indicator 12. ERRor indicator 19. HOLD indicator
6. microsiemens indicator 13. MEMory location indicator 20. READY indicator
7. parts per thousand indicator 14. Low battery indicator