Thermo Fisher Scientific CyberScan CON 400 (For units manufactured from March 2010 onwards) - Manual (Page 31)

Instruction Manual CON 400
- 25 -
7.1 Advanced SETUP Mode Overview
Press the SETUP key to enter Set up mode.
Press the MI/S or MR/T keys to scroll through sub groups.
Press ENTER key to enter a particular parameter.
See Addendum 4 on page 48 for a table of meter factory default settings.
P1.0: Memory clear
P1.0 Clear all stored readings
P2.0: Viewing previous calibration data
P2.1
First range calibration point
P2.2 Second range calibration point
P2.3 Third range calibration point
P2.4 Fourth range calibration point
P2.5 Fifth range calibration point
P3.0: Viewing electrode data
P3.1
Effective cell constant for first range
P3.2 Effective cell constant for second range
P3.3 Effective cell constant for third range
P3.4 Effective cell constant for fourth range
P3.5 Effective cell constant for fifth range
P4.0: Unit configuration
P4.1
READY indicator and auto endpoint function –
select on or off
P4.2 Select °C or °F
P4.3 Select Automatic or Manual Temperature
Compensation
P4.4 Setting TDS conversion factor (CON 410
meter only)