Thermo Fisher Scientific CyberScan CON 400 (For units manufactured from March 2010 onwards) - Manual (Page 27)

Instruction Manual CON 400
- 21 -
6 MEMORY AND DATA INPUT FUNCTIONS
6.1 Memory Input
Your meter stores up to 50 sets of data. Data sets
include conductivity, temperature, date and time.
To store a reading:
1.
During any measurement function (MEAS), press
MI/S key to input any data into the memory.
2. MEM, “Sto” and memory number will flash. The
meter then returns to measurement mode.
3. If necessary, measure the next sample solution and
press MI/S key to input the next data into the
memory.
See figure 14.
NOTE: If the memory is full, the first value stored will be
erased to create space for the new value.
Figure 14 - Memory input