beautypg.com

5 measurement – Thermo Fisher Scientific CyberScan CON 400 (For units manufactured from March 2010 onwards) User Manual

Page 21

background image

Instruction Manual

CON 400

- 15 -

5 MEASUREMENT

This meter is capable of taking measurements with automatic or manual temperature
compensation. Factory default is set with automatic temperature compensation (ATC) on.

5.1 Automatic

Temperature

Compensation

For automatic temperature compensation (ATC) simply
plug the conductivity/TDS probe into the meter (see page
6 for directions). The ATC indicator will light on the LCD.
NOTE: If the ATC indicator does not light, manual

temperature compensation may be selected in
the meter’s SETUP mode. See Program P4.3 on
page 32 for directions on selecting Automatic
Temperature Compensation.

Figure 11 - ATC annunciator will

light up when connected to

temperature probe