SHIMPO DT-329 User Manual
Page 10
7
4
Function Instructions
4.1 Power on/off
Turn on Main Power Switch, then press “POWER” key to turn on unit. The unit will begin to flash in internal
mode and the display will indicate the flash rate (FPM = flashes per minute).
Operation
Indication
Power off
Press and release
Press “POWER” key again to turn off unit. The display will turn off, and the device will stop flashing. Then
turn off the main power switch.
Operation
Indication
Power on
Press and release
4.2 Mode Selection
Press and release “MODE” key to toggle between INTERNAL, EXTERNAL and PARAMETER mode.
MODE doesn't change while flashing. Please stop flashing by pressing “FLASH" key.
Operation
Indication
Press and release
to switch modes
Display will indicate the
flash rate in internal
mode, and the LED light
source will begin
flashing.
Internal flashing mode
External trigger mode
Parameter setting mode
Display will turn off and
unit will stop flashing.
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
POWER
POWER
MODE
MODE
MODE
MODE
POWER
POWER
Auto Range
Trigger
Edge Deley Deg
Flash
Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash
Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
Auto
Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash
Time
Ave Last Min
Max
min
sec
h
Hz
○○○○
Auto
Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min
Max
min
sec
h
Hz
○○○○