SHIMPO DT-315P - Manual (Page 17)

SPECIFICATIONS
DISPLAY 5 digit, 7 segment red LED (Character height 0.39 in. (10mm)
SETTER FLASHING DELAY AGLE: JOG SHUTTLE
MODE, DISPLAY UNIT: TACT SWITCH
FLASHTUBE Xenon lamp: FLASHTUBE311-2
FLASHTUBE POWER MAX. 10W
FLASHTUBE TIME Approx. 0.30µSec
* Operation by built-in battery
Nicd battery, 8KR-2000sce SANYO
Operating time: approx. 1 hour (Full charge at 3,000 FPM)
Battery charge time: approx. 10 hours
Charge with the provided adapter.
Do not charge battery over 24 hours.
Operation during charging is possible.
When you are charging during use, do not
POWER use over 10 hours continuously
* Operate by external power
Unplug the connector of the built-in battery
before operating the strobe by external
power to avoid overcharging of the battery.
DC: 9~14.5V, Max 24W
(current consumption is 24W/input voltage)
or operate by provided adapter
AC: 100V ±10%, 50Hz, Max. 40VA
OPERATING TEMPERATURE 0-104°F (0-40°C)
WEIGHT Approx. 4.63 lbs (2.1kg)
POWER PLUG PJ-2 (Sato parts) or the equivalent
ACCESSORIES INPUT/OUTPUT SIGNAL PLUG, AC adapter