SHIMPO DT-315P User Manual
Page 11
NOTE:
TRUE RPM
All strobes give the illusion of stopped motion when flashing submultiple of the
true speed.
* To obtain the correct rpm; Turn the dial from high rpm down to low rpm. When
the first single image appears, read the true rpm. To verify the rpm, press the
÷2 button. A single image will appear again.
FLASH TUBE REPLACEMENT
Indications:
• Lamp life is about 100 million flashes.
• Rotation speed is displayed, no flash is emitted.
• When the flash is intermittently emitted, this indicates the lamp must
be replaced.
• Only
replace flash tube with the specified lamp: (FLASHTUBE311-2).
Directions:
(1) After unplugging the line cable from the power line, let the
stroboscope sit for about 30 minutes or longer. Be sure stroboscope is
cool to the touch before replacing the lamp.
(2) Remove the lamp protection window by loosening the 4 screws on the
window. Insert a fine screw driver into a hole of the protection window
and pull out.
- DT-361 (36 pages)
- DT-365E (28 pages)
- DT-311A (4 pages)
- DT-311J (12 pages)
- DT-315AEB (4 pages)
- DT-326 (35 pages)
- DT-725 (4 pages)
- DT-900 (33 pages)
- ST-1000 (2 pages)
- ST-5000 (4 pages)
- SG-300 (2 pages)
- DT-721 (4 pages)
- DT-329 (32 pages)
- DT-105A (2 pages)
- DT-107A (2 pages)
- MT-100 (4 pages)
- MT-200 (4 pages)
- PT-110 (2 pages)
- DT-105A-S12 (2 pages)
- DT-205L (4 pages)
- DT-205L-S12 (4 pages)
- DT-207L (4 pages)
- DT-207L-S12 (4 pages)
- DT-209X (68 pages)
- DT-5TXR (20 pages)
- DT-5RL-1 (2 pages)
- DT-5TP (8 pages)
- DT-601CG (54 pages)
- FGV-XY-Series (32 pages)
- FGE-X (8 pages)
- FGE-HX (8 pages)
- FG-3000 (8 pages)
- FG-7000-Series (8 pages)
- DFS-series (20 pages)
- DRI-series (20 pages)
- EM-series (2 pages)
- FGE-series (4 pages)
- FGV-series (4 pages)
- FGE-H-series (4 pages)
- FGV-H-series (4 pages)
- MF Series (2 pages)
- MFD_Series (2 pages)
- FGS-100E (20 pages)
- FGS-100-PXH (20 pages)