Revo R4-8DVR4 - Manual (Page 26)

User’s Manual
20
 Recipient: Enter the recipient’s e-mail address and select the mail server provider.
The e-mail address must include the “@” character to be a valid address.
 : Deletes the mail accounts.
 SMTP Setup: Select the button and set up the SMTP server.
Type – Select between Manual and listed SMTP mail server providers.
SMTP Server – Enter the SMTP server IP address or domain name obtained
from your system administrator.
NOTE: You will need to get the IP address or domain name of the
SMTP server from your network administrator. You can use the
domain name instead of IP address if you set up the DNS server
during Network setup.
Port – Set the SMTP server port number obtained from your system
administrator.
Use SSL/TLS – Check the box when sending an e-mail via an SMTP server
requiring SSL (Secure Sockets Layer) authentication.
Authentication – Select the button if the SMTP server needs authentication,
and set up the Authentication by selecting the Use box and entering the user
ID and password.
NOTE: This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit (http://www.openssl.org/).
Sender – Enter the sender’s e-mail address. The e-mail address must include
the “@” character to be a valid address.
Push Settings (NETWORK
 Push Tab)
 Push: Selecting the box enables the Push Notification
service.
 Push Server: Displays the push server address.
 Ignoring Time: Set the push ignoring dwell time. The DVR
will not send callback messages during the preset interval
range when the same event is detected.
Schedule Settings (NETWORK
 Schedule Tab)
 : Adds the notify schedule.
No. – Indicates a schedule number. The higher the number,
the higher its priority. (i.e. The schedule No. “20” has priority
over all others.)
Day – Select the days that the DVR notifies the remote site.
Range – Set the time range that the DVR notifies the remote site.
Notify – Set the notify actions that the DVR will take when the
event is detected.
– Deletes the notify schedule settings.
 Summary Email Interval: Set the interval that you want
the DVR to send a summary email. The DVR will send an
email containing a summary of events detected during the
preset interval range.