Martel Electronics 3001 - Manual (Page 90)

12.11 Pressure Measurement Specifications
The 3001 can accept either the Fluke Corporation 700 series pressure modules, Mensor
Corporation 6100 series pressure modules, or BETA Calibrators Corporation BETA Port-P
pressure modules. Pressure modules plug directly into the front panel Lemo connector
with the 3001 firmware autodetecting the type and value of the module you are attaching.
Range Accuracy and Resolution Units
Determined by the Determined by the
pressure module
pressure module PSI (pounds per square inch)
86
in H
2
O 4°C
(inches of water at 4 degrees Celsius)
in H
2
O 20°C
(inches of water at 20 degrees Celsius)
in H
2
O 60°F
(inches of water at 60 degrees Fahrenheit)
cm H
2
O 4°C
(centimeters of water at 4 degrees Celsius)
cm H
2
O 20°C
(centimeters of water at 20 degrees Celsius)
mm H
2
O 4°C
(millimeters of water at 4 degrees Celsius)
mm H
2
O 20°C
(millimeters of water at 20 degrees Celsius)
BAR
(bars)
mBAR
(millibars)
kPa
(kilopascals)
MPa
(megapascals)
in HG 0°C
(inches of mercury at 0 degrees Celsius)
mm HG 0°C
(millimeters of mercury at 0 degrees Celsius)
Kg/cm 2
(kilograms per square centimeter)