Martel Electronics 3001 - Manual (Page 67)

Examples: Explanation
OUT 15.2 V Change to DC volts, output 15.2 V
OUT 1.2 mA Change to DC current, output 1.2 mA, note units prefix
multiplier m
OUT 5 Ohm Change to Resistance, output 5 O
OUT 100 CEL Change to temperature in °C, output 100 °C
OUT 3 No change to output mode, output a value of 3 in the
present units
OUT? IEEE-488 RS-232 Sequential Overlapped
This command returns the present output value and units of the 3001.
Parameter:
Response: ,
where is the present output value
and where is one of the following:
V DC volts
A DC current
OHM Resistance
CEL Temperature in Celsius
FAR Temperature in fahrenheit
Examples: Explanation
OUT?
1.88300E-02,A Present output is 18.83 mA
OUT?
1.23000E+00,V Present output is 1.23 V
OUT?
4.00000E+03,OHM
Present output is 4.0 KO
OUT?
1.0430E+02,CEL
Present output is 104.3 °C
X X X
63