KROHNE C95 CI EN - Manual (Page 2)

4.8 Access code p20
4.9 Programming of a new access code p20
4.10 Functions accessible in the main menu p20
4.10.1 - Display simulation p20
4.10.2 - Analog ouptut simulation p21
4.10.3 - Menu CLEAr : p21
Deleting of recorded alarms
4.10.4 - Menu CLr.tA : p21
Deleting of the recorded tare
5 . FUNCTIONS DIRECT FROM THE DISPLAY p21
5.1 Functions which require pressing only 1 key p21
5.1.1 - On the instant value display p21
a / Minimum value display p21
b / Maximum value display p21
c / Erasing of min. and max. values p22
5.1.2 - On the totalizer display p22
a / Upper part display p22
b / Access to the zero reset menu p22
5.2 Functions which require pressing several keys p22
5.2.1 - Display shifting p22
5.2.2 - Tare setting p23
5.2.3 - Changing of the displayed value p23
5.2.4 - Direct measure visualisation p23
5.2.5 - Visualisation and setting of alarm setpoints p23
6 . ERROR MESSAGES p23
7 . GENERAL WARRANTY TERMS p24
8 . LEXIQUE p24
9 . ANNEXE : MODBUS p28
9.1 Table of Modbus addresses p28
9.2 Description of born Modbus functions p29
9.3 Reading in double integer format p29
9.4 CRC16 calculation algorythm p30
S
Summary
1 . INTRODUCTION p2
2 . SPACE REQUIREMENTS p3
3 . WIRING p4
4 . PROGRAMMING p5
4.1 Communication with the instrument p5
4.2 Orientation through programming p6
4.3 Main menu p6
4.4 Programming menu p6
4.4.1 - Input programming p7
4.4.2 - Display programming p7
4.4.3 - Programming of the totalizer p8
4.4.4 - Programming of the analog output p8
4.4.5 - Programming of the digital output p9
4.4.6 - Programming of the LOGIC inputs p9
4.4.7 - Programming of the relay outputs p10
4.4.8 - Programming of the safeties p11
4.4.9 - Programming of the brightness, displays
and bargraph
p12
4.4.10 - Programming exit p13
4.5 Input features and programming limits p13
4.5.1 - Current input p13
4.5.2 - Voltage input p14
4.5.3 - Instant value display p14
4.5.4 - Totalizer
p15
4.5.5 - Display features p15
4.5.6 - LOGIC inputs p16
4.6 Output features and programming limits p17
4.6.1 - Analog output p17
4.6.2 - Digital output p17
4.6.3 - Relay outputs p17
4.6.4 - Safeties p18
4.7 Configuration reading p19