KROHNE OPTISENS OAM 2080 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTISENS OAM 2080
www.krohne.com 08/2010 - MA OPTISENS OAM 2080 R01 en
Safety instructions
1.1 Software history
1.2 Intended use
In combination with the MAC 080 converter the OAM 2080 sludge blanket meter is primarily
designed for use in water and waste water treatment plants. There it determines the sludge
blanket depth in clarifiers and sludge thickeners. It measures the suspended solids
concentration and height of the sensor above ground as the sensor is lowered into the basin or
tank.
However, the design of the OAM 2080 makes it possible to use it in other applications where
reliable monitoring of interface or stratification in suspensions is necessary.
1.3 Certifications
The device fulfils the statutory requirements of the following EC directives:
• Electromagnetic compatibility (EMC) in accordance with:
EN 61000-6-4:2001: Emission standard for industrial environments;
EN 61000-6-2:2001: Immunity for industrial environments
• Low Voltage Directive:
Safety requirements for electrical equipment for measurement, control and laboratory use in
accordance with EN 61010-1:2001
The manufacturer certifies successful testing of the product by applying the CE marking.
INFORMATION!
This documentation details the installation and operation of the OPTISENS OAM 2080 sludge
blanket meter. For all information related to the converter (e.g. installation or technical data)
refer to the converter documentation.
Release date Software version Documentation
04/2010 0.7 MA OAM 2080 R01 en
INFORMATION!
The OPTISENS OAM 2080 only works in conjunction with the OPTISENS MAC 080 multiparameter
converter which you need for configuration, local display and transmission of the measuring
results. Additionally the converter must have the software version 3.1 or higher. The converter
and the mounting plate belong to the standard scope of delivery.
CE marking
.book Page 5 Friday, August 20, 2010 1:07 PM