KROHNE OPTISENS OAM 2080 EN - Manual (Page 40)

7
TECHNICAL DATA
40
OPTISENS OAM 2080
www.krohne.com 08/2010 - MA OPTISENS OAM 2080 R01 en
Operating conditions
Temperatures and pressure Temperatures and pressure Temperatures and pressure Temperatures and pressure
Ambient temperature -20...+50°C / -4...+122°F
Process temperature 0...+50°C / +32...+122°F
Storage temperature -10...+60°C / +14...+140°F
Maximal immersion depth 10 m / 32,8 ft
Water pressure (process) Ambient
Water pressure (flushing) 2...6 bar / 29...87 psi
Protection category IP 55
Installation conditions
Installation position Fixing on a handrail at open channels, basins or tanks.
Dimensions & weights For detailed information refer to the section "Dimensions and
weights".
Materials
Enclosures Whole meter and sensor: SIS 2343 (316 SS)
Connection cable to converter Polyurethane
Electrical connections
Power supply (voltage) Europe: 230...250 VAC at 50 Hz
USA: 115 VAC at 60 Hz
Power consumption Maximal 450 W
Fuse 5 A (T1AH, 20 x 5 mm)
Connection cable to converter 5-pin M12 contact, shielded, 1,5 m / 4,9 ft long (extension cables
optionally available).
Input and output (converter) Refer to technical documentation of the relevant converter.
Approvals and certifications
CE The device fulfils the statutory requirements of the EC directives.
The manufacturer certifies that these requirements have been met
by applying the CE marking.
EMC Electromagnetic compatibility (EMC) in accordance with:
• EN 61000-6-4:2001 (Emission standard for industrial environments)
• EN 61000-6-2:2001 (Immunity for industrial environments)
Low Voltage Directive Safety requirements for electrical equipment for measurement,
control and laboratory use in accordance with EN 61010-1:2001.
.book Page 40 Friday, August 20, 2010 1:07 PM