KROHNE IFC 300 Converter FOUNDATION FIELDBUS EN - Manual (Page 21)

OPERATION
4
21
IFC 300
www.krohne.com 02/2011 - 4001086501 - AD IFC 300 FF R02 en
FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO
Foundation Fieldbus Foundation Fieldbus Foundation Fieldbus Foundation Fieldbus
Board Information Board Information Board Information Board Information
R For details see subelements. "Actual values"
IDENT_NUMBER
Ident Number
R Actual ident number
HARDWARE_ID
Hardware Ident
Number
Actual hardware number
SOFTWARE_VERSION
Software Version
Actual software version
PRODUCTION_DATE
Production Date
Date of production
CALIBRATION_DATE
Calibration Date
Date of calibration
FF_SERIAL_NO
Foundation Fieldbus
Serial Number
Actual serial number
OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR
Operation Hour Operation Hour Operation Hour Operation Hour
R Operation hour since first start-up. "Actual values"
PASSWRD PASSWRD PASSWRD PASSWRD
Password Password Password Password
R/W Password to activate access rights to restricted parameters. 0
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
Protection Information Protection Information Protection Information Protection Information
R Current protection level to restricted parameters. Production
Setting:
bit 5…7 (not used) / User / Service Level / Production /
Custody Transfer / Write Lock
SERIAL_NO SERIAL_NO SERIAL_NO SERIAL_NO
Serial Number Serial Number Serial Number Serial Number
R Device serial number and serial number of the system. "Actual values"
SW_SIMULATE SW_SIMULATE SW_SIMULATE SW_SIMULATE
Software Simulate Software Simulate Software Simulate Software Simulate
R/W Enable/disable simulation like simulation jumper. Disable
Setting:
Disable / Active
Parameter Parameter Parameter Parameter
Subelement Access Description and settings Initial Value
.book Page 21 Tuesday, January 18, 2011 3:40 PM