KROHNE IFC 300 Converter Quickstart EN - Manual (Page 7)

INSTALLATION
2
7
IFC 300
www.krohne.com 08/2010 - 4000070303 - QS IFC 300 R06 en
2.6 Mounting of the compact version
2.7 Mounting the field housing, remote version
2.7.1 Pipe mounting
1 Fix the signal converter to the pipe.
2 Fasten the signal converter using standard U-bolts and washers.
3 Tighten the nuts.
INFORMATION!
The signal converter is mounted directly on the measuring sensor. For installation of the
flowmeter, please observe the instructions in the supplied product documentation for the
measuring sensor.
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
Figure 2-2: Pipe mounting of the field housing