beautypg.com

Electrical connections – KROHNE IFC 300 Converter Quickstart EN User Manual

Page 62

background image

3

ELECTRICAL CONNECTIONS

62

IFC 300

www.krohne.com

08/2010 - 4000070303 - QS IFC 300 R06 en

3.10.3 19" rack-mounted housing (28 TE), electrical connection of the inputs and outputs

• For frequencies above 100 Hz, shielded cables are to be used in order to reduce effects from

electrical interferences (EMC).

• Terminal A+ is only operable in the basic version.

• Connect the conductor to the multipolar plug according to the illustration.
• The signal cable shield is connected to the Pin S.
• Press the plug into the connector.

DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!

Figure 3-41: Terminal compartment for inputs and outputs in rack-mounted housing

1 Shielding