Atlantis Land A02-RAV260-W54 - Manual (Page 89)

VoIPMaster 260W
83
3.6.3.6 QoS
QoS function helps you to control your network traffic for each application from LAN
(Ethernet) to WAN (Internet). It facilitates you to control the different quality and speed of
through put for each application when the system is running with full loading of upstream.
You can find two items under the QoS section: Prioritization and IP Throttling (bandwidth
management).
3.6.3.6.1 Prioritization
There are three priority settings to be provided in the modem:
• High
• Normal (The default is normal priority for all of traffic without setting).
• Low
The trigger of check can base on IP protocol, port number and address.
And the balance of utilization of each priorities are High(60%), Normal(30%) and Low(10%).
Application: A user-define description to identify this new policy/application.
Time Schedule: Scheduling your prioritization policy.
Priority: The priority given to each policy/application. Its default setting is set to High; you
may adjust this setting to fit your policy/application.
Protocol: The name of supported protocol.
Source Port: The source port of packets to be monitored.
Destination Port: The destination port of packets to be monitored.