beautypg.com

Atlantis Land A02-RAV260-W54 User Manual

Page 87

background image

VoIPMaster 260W

81

Special dial codes

The following table lists the special dial codes that are built-in to the system:

Option Description

Flash-hook

(Wireless Router with
LINE port only)

Switch to PSTN line

Note: A quick press of the hook. On some phones a button
is provided which provides Flash-hook functionality. The
button is marked "FLASH" or "RECALL".

*69

Return the last missed call for SIP service only

Note: Entering this on a phone will call the last number
which made a call to the phone. For example A makes a call
to B, but hangs up before B answers. If B enters *69, A will
be called.

##

Last number redial

*20

Set do not disturb on

Note: It is possible to set a Do-Not-Disturb feature on a
phone such that any phone which calls the phone will
receive an engaged tone and the phone called will not ring.
For example, B enters *20 and hangs up. A makes a call to
B, and receives the engaged tone and phone B does not
ring.

*80

Set do not disturb off

*74#

Set the number for Speed dial code ‘x’, where ‘x’ is a
number between 2 and 9.

Note: Where is a number between 2 and 9, and
is the number to dial. The code needed to dial a
speeddial from a phone connected to a VoIP Router is:
<x>#, where is a number between 2 and 9.
The settings will infect to your setting in Speed Dial on WEB
GUI.

*90

Set the number for performing Blind Call Transfer, where
is the number that you wish to transfer the
call to. It’s for SIP service only.

Note: In Blind Call Transfer, you have a call in progress
(incoming or outgoing) and decide you wish to transfer the
call to another phone. To transfer the call, perform the
following steps:

1. Hook-flash to get a dial tone.