Atlantis Land A02-RAV260-W54 - Manual (Page 57)

VoIPMaster 260W
51
3.6.3.3 SYSTEM
There are six items within the System section: Time Zone, Remote Access, Firmware
Upgrade, Backup/Restore, Restart and User Management.
3.6.3.3.1 Time Zone
The router does not have a real time clock on board; instead, it uses the Simple Network Time
Protocol (SNTP) to get the current time from an SNTP server outside your network. Choose
your local time zone, click Enable and click the Apply button. After a successful connection to
the Internet, the router retrieves the correct local time from the SNTP server you have specified.
If you prefer to specify an SNTP server other than those in the drop-down list, simply enter its IP
address as shown above. Your ISP may provide an SNTP server for you to use.
Daylight Saving: is also known as Summer Time Period. Many places in the world adapt it
during summer time to move one hour of daylight from morning to the evening in local standard
time. Check Automatic box to auto set your local time.
Resync Period (in minutes) is the periodic interval the router waits before it resynchronizes the
router’s time with that of the specified SNTP server. To avoid unnecessarily increasing the load
on your specified SNTP server you should keep the poll interval as high as possible at the
absolute minimum every few hours or even days.
3.6.3.3.2 Remote Access
To temporarily permit remote administration of the router (i.e. from outside your LAN), select a
time period the router permits remote access for and click Enable. You may change other
configuration options for the web administration interface using Device Management options in
the Advanced section of the GUI.