Atlantis Land A02-RAV260-W54 - Manual (Page 42)

VoIPMaster 260W
36
Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address
which connecting to the router.
You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add
to insert to the Ethernet Client Filter table. The maximum Ethernet client is 16.
3.6.3.1.5 Wireless
WLAN Service: Default setting is set to Enable. If you do not have any wireless, both 802.11g
and 802.11b, device in your network, select Disable.
Mode: The default setting is 802.11b+g (Mixed mode). If you do not know or have both 11g and
11b devices in your network, then keep the default in mixed mode. From the drop-down
manual, you can select 802.11g if you have only 11g card. If you have only 11b card, then
select 802.11b.
ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from
another. For security propose, change the default wlan-ap to a unique ID name to the AP
which is already built-in to the router’s wireless interface. It is case sensitive and must not
excess 32 characters. Make sure your wireless clients have exactly the ESSID as the device, in
order to get connected to your network.
It is case sensitive and must not excess 32 characters.