5 information from the isp, 6 configuring with the web browser, 2 lan and wan port addresses – Atlantis Land A02-RAV260-W54 User Manual
Page 28
VoIPMaster 260W
22
If you ever forget the password to log in, you may press the RESET button to
restore the factory default settings. After turning the router on press the
Emergency/Failure Recovery Button on the back of the modem, and hold the
button in until all lights on the modem flash and it reboots with factory default
settings. The login will be reset to admin and the password will be reset to
admin, and the modem will be accessible via its default IP address at
http://192.168.1.254/
3.4.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server
function
Enabled
N/A
3.5 Information from the ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider) what
kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System
(DNS) IP address (it can be automatically assigned from
ISP or be set fixed).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP
address (it can be automatically assigned from ISP or
be set fixed).
RFC1483 Bridged
VPI/VCI, VC-based/LLC-based multiplexing and configure
this product into BRIDGE Mode.
RFC1483 Routed
VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name
System (DNS) IP address (it is fixed IP address).
IPoA
VPI/VCI, IP address, Subnet mask, Gateway address,
and Domain Name System (DNS) IP address (it is fixed
IP address).
3.6 Configuring with the Web Browser
Open the web browser, enter the local port IP address of this ADSL2+ VOIP Router, which
defaults at http://192.168.1.254, and click “Go”, a username and password window will appear.
The default username & password are admin & atlantis, in respectively