Atlantis Land A02-RAV260-W54 - Manual (Page 79)

VoIPMaster 260W
73
3.6.3.5.4 PSTN Dial Plan
This section enables you to configure “VoIP with PSTN switching” on your system. You can
define a range of dial plans to make regular call from VoIP switching to PSTN line. Prefix
numbers is essential key to make a distinguishing between VoIP and Regular phone call. If
actual numbers dialed matches with prefix number defined in this dial plan, the dialed number
will be routed to the PSTN to make a regular call. Otherwise, the number will be routed to the
VoIP networks.
In order to utilize this feature, you must have registered and connected to
your SIP Server fist.
Prefix: Specify number(s) for switching to a PSTN call.
Number of Digits: Specify the total number of digits wish to dial out. Maximum digit number is
15.
Action: Specify a dialing method you wish to make PSTN call(s).
• Dial with Prefix: The dialed number with prefix will be sent call through the PSTN.
NOTE: The actual dialed number of valid digits length requires matching in the Number
of Digits filed.
• Dial without Prefix: The dialed number will be sent call through the PSTN without
prefix.
NOTE: The actual dialed number of valid digits length requires matching in the Number
of Digits filed.
• Dial at Timeout: The dialed number will be sent call through the PSTN with the prefix
when timeout starts. This timeout activates when no more digits are dialed in a specific
duration.
NOTE: The actual dialed number of valid digits length MUST NOT exceed in the
Number of Digits filed.
• Dial at Timeout no Prefix: The dialed number will be sent call through the PSTN
without prefix when timeout starts. This timeout activates when no more digits are dialed
in a specific duration.
NOTE: The actual dialed number of valid digits length MUST NOT exceed in the
Number of Digits filed.