KANOMAX 3886 Handheld Particle Counter - Manual (Page 8)

1
1. Check of Components
When unpacking, check the contents in the box using the list below
1.1 Standard accessories
Name Model No. Functions
Filter Model 3886-03 Used to clean the air flow route inside the instrument with clean air.
AC Adapter Model 3886-01
Used for AC powered operation. To be used especially for
continuous measurements.
Ni-MH (Nickel
Metal Hydride)
Batteries
FNH HR AA 4BF
(Fuji Film Battery)
Used for battery powered operation.
*The dedicated battery charger listed below must be used for
charging the batteries. The AC adapter cannot be used for
charging the batteries.
Quick Charger
FNW 1 BX D
(Fuji Film Battery)
For charging the Ni-MH batteries. Charging time is approx. 260
minutes.
1.2 Options
Name Model No. Functions
Temp. &
Humidity probe
Model 0842 For measuring temperature and humidity.
Air Velocity probe Model 0843 For measuring air velocity.
Extension rod for
air velocity probe
Model 0843-01 For measuring air velocity at high locations.
Printer DPU-201GS For direct printing of measured data.
Printer cable Model 3886-07 For connecting the instrument and the printer.
Application soft Model S388-61
For transferring data stored in the instrument to a PC, and remote
control of the instrument from the PC.
RS-232C cable Model 3886-08 For connecting the instrument and the PC
Carrying Case Model 3886-02 For storing and carrying the instrument.
Tripod For fixing the instrument for a measurement.