KANOMAX 3886 Handheld Particle Counter - Manual (Page 28)

21
6. Data Processing
6.1 Request for stored data in built-in memory… <4.DATA>
Maximum 500 data can be stored, but the one measurement of CALC
mode is regarded as 4 data. For example, if the first data is stored at
number 016, next one is stored at number 020.
STORE □□□
Indicates the current total number of
stored data
1 DISPLAY Display of stored data on the screen
2 DUMP Dump of stored data
3 PRINT Printout of stored data
4 CLEAR Delete of stored data
△ ▽ key Move the cursor
SET key
Shift the setting screen of the selected
function
PREV key Go back to MENU after the set up
6.2 Display of stored data on the screen… <4.DATA>→<1.DISPLAY>
△ ▽ key Adjust the value
SET key Move the cursor
START/STOP key Shift the data display screen
PREV key Go back to DATA
Push START/STOP key to display the selected data
△ ▽ key
Shift the previous/subsequent stored
data
SET key
Shift the other data of the same
stored data
PREV key Go back to Display
STORE □□□
1.DISPLAY 3.PRINT
2.DUMP 4.CLEAR
STORE 001
0.3µm 0.00E+0 ／cf
0.5µm 0.00E+0 ／cf
STORE 001
1µm 0.00E+0 ／cf
3µm 0.00E+0 ／cf
5µm 0.00E+0 ／cf
STORE 139
START 001