KANOMAX 3886 Handheld Particle Counter - Manual (Page 5)

iii
○
Set the batteries in the correct direction
… Setting the batteries in the wrong direction may cause
leakage, leading to contamination of the instrument and
surroundings.
○
Do not wipe the body with solvent
… The body may deform or deteriorate. Use soft dry cloth to remove stains.
If stains persist, soak the cloth in a neutral detergent and wipe the
instrument with a soft cloth.
Do not use volatile solvents such as thinner and benzine.
○ Do not use the instrument near equipment emitting high radiation noise.
…
The instrument may malfunction due to the noise. The Air velocity sensor is
especially sensitive to radiation noise.
○
Connect the AC adapter to a power source with minimum noise.
… The noise may cause malfunctioning.
○
Do not pull the probe cable strongly, or suspend the unit by
holding the cable.
… It may cause malfunctioning and breaking of the wire.
○
Do not use the instrument in a water vapor atmosphere.
… The heat dissipation rate will change, preventing
correct measurement.
It may also damage the sensor.
○
Do not apply strong force to the sensor
… Deformation of the sensor will prevent accurate
measurement. It may also break the wire of the
sensor.
※ Air Velocity probe and Temp.& Humidity probe are options (sold separately)
＋
−
Handle Properly
Insert correctly
Forbidden
Forbidden
Forbidden
Forbidden
Water Drops
Force
Caution