KANOMAX 3886 Handheld Particle Counter User Manual
Page 27
20
5.6 REMOTE Mode
From computer to measurement mode by remote control
（
The application software of the option is necessary.）
The connection method with the computer is the same method as forwarding the record data. (Refer to 6.3)
Display screen
Operation key
Operation explanation
POWER
Push POWER key to input the power supply.
PREV
Push PREV key twice to proceed MODE screen
△ ▽ SET
Select 5. REMOTE
△ ▽ SET
■
Setup the particle size, alarm ,.
Use △ ▽ key to change the setting
Condition, then push SET key.
After the input is done, change NO to OK
and push SET key.
The measurement begins automatically when the
application software is operated.
REMOTE 0.3／0.5µm
BEEP:N
OK
REMOTE B 15:25
0.3 0.00E+0／cf
0.5 0.00E+0／cf
25.5℃ 56.0% 0.25m／s
1.REPEAT 4.CALC
2.SING 5.REMOTE
3.CONT