In-Situ Con TROLL PRO Installation Manual (purchased after 10 May 2012) - Manual (Page 8)

8
Mounting the Controller
Danger—Only properly trained and qualified personnel should install the
controller described in this manual. This instrument should be installed for use in non-
hazardous locations only.
Danger—L'installation de l'appareil “controller” décrite dans le guide d'utilisateur
doit impérativement être réalisée par des personnes qualifiées. L'installation de cet
appareil est seulement prescrite pour des emplacements sans risques.
Optional Mounting Kit
The mounting kit contains the following items.
l
Two stainless mounting brackets
l
Two 1.5—3.5 in. diameter hose clamps
l
One package containing mounting tabs (4), nuts (4), and screws (4)
l
DIN rail mounting brackets
The nuts and screws supplied with the mounting tabs are suitable for use with the
mounting brackets.
Figure 3.1 Con TROLL PRO mounting kit