In-Situ Con TROLL PRO Installation Manual (purchased after 10 May 2012) - Manual (Page 3)

3
Table of Contents
1 Safety 5
Hazard Symbols that Appear in the Manual 5
Precautionary Labels that many Appear on the Product 5
2 Overview 6
Available Models 6
Box Contents 7
3 Mounting the Controller 8
Optional Mounting Kit 8
Mounting Options 9
Controller Dimensions 9
Pole Mounting 11
Wall Mounting Using Mounting Tabs 12
Wall Mounting with User-supplied Hardware 13
DIN Rail Mounting the Enclosure 14
Placing Dome Connectors and Plugs in the Enclosure 14
4 Electrical Connections 16
Power Options 16
Electro-Static Discharge (ESD) Recommendations 16
Customer-Supplied Electrical Equipment 16
Ensuring Dome Connectors are Water-Tight 16
Ensuring Good Electrical Connections 17
Relay Connections 18
Disconnecting AC Power 19
Desiccant Pack 19
5 Input/Output Connections 20
PLC Connections 20
Sensor Wiring Connections 21
Current Loop Outputs 22
Relay Connections on the I/O Board 24
Desiccant Pack 24
6 Optional Battery Box 25
Overview of Battery Box Kit 25
Additional Considerations 25
Preparing the Power Cord 25
Mount the Enclosure 25
Connect the External Battery Enclosure to the Controller Enclosure 25
Connect the Battery Terminals 26
7 Maintenance 27
Cleaning the Outside of the Enclosure 27
Replacement Desiccant 27
Replacement Clock Battery 27
User-Serviceable Parts 27
8 Specifications 28