Overview of this document – A.O. Smith 30 User Manual
Page 11
Instruction manual SGS
11
gis
1.7
Overview of this
document
Chapter
Target groups
Description
This chapter describes the working principle of the
appliance.
This chapter describes the installation activity to be
completed before you start the appliance for the first time.
This chapter describes the activities required to convert
the appliance to a different gas category.
This chapter describes how to fill the appliance.
This chapter describes how to drain the appliance.
This chapter describes the general control of the
appliance using the display.
This chapter describes the status (mode or condition) that
the appliance may have, and possible actions to take.
This chapter describes how to start the appliance running.
The general heating cycle of the appliance is also
described.
This chapter describes how to shut the appliance down for
a brief or long period of time.
This chapter describes the main menu of the display. This
is the actual menu for the user, however the installation
engineer and service and maintenance engineers will also
need to use this menu.
This chapter describes the service menu. It is mainly
intended for the installation engineer and service and
maintenance engineers. End users may also refer to this
chapter for additional information about the appliance.
This chapter is mainly intended for the installation
engineer and the service and maintenance engineer. It
describes appliance errors. These errors are indicated on
the display. A troubleshooting table of possible causes
and solutions is provided. End users may also refer to this
chapter for additional information about the appliance.
This chapter describes how to determine the optimum
frequency at which to carry out maintenance. Both the
end user and the service and maintenance engineer are
responsible for regular maintenance. They need to reach
clear agreement on this.
Note
If the appliance is not regularly maintained, the
warranty will become void.
This chapter sets out the maintenance tasks to be carried
out during a service.
This chapter states the warranty terms and conditions.