HT instruments HT7052 - Manual (Page 33)

HT7052
EN - 31
8 CONNECTION OF THE INSTRUMENT TO PC
The saved data can be transferred to PC by using the TeraView dedicated software
included with instrument
TeraView software permits the herewith operations:

Download data from meter
 Define customized settings on the final report
 Analyze the results of measurements in numerical and graphical screens
 Print the final report
 Export the data in text (TXT) format file
MINIMUM SYSTEM REQUIREMENTS
Pentium III – 500MHz
512 MB RAM
100 MB free space on HD
CD-ROM reader
USB/serial port
Video resolution 800x600
Windows systems: Win2k/XP/Vista/Win7 32 bit and 64 bit platforms
8.1 INSTALLATION OF SOFTWARE AND INITIAL CONFIGURATIONS (WIN XP)
1. Close all the open application on the PC
2. Insert the supplied CD-ROM in the PC reader
3. Launch the “TeraView.exe” file included on CD-ROM and follow the steps to correctly
install the TeraView software
4. Switch on the instrument, set the USB mode (see § 5.2) and connect it to the PC by
using the supplied USB cable
5. Read the “Instal_USB_neutral.pdf” file inside the “Handbook” folder for the installation
of USB driver on the PC
6. Launch the TeraView software
7. Select the command “Config  Password…”, type the serial number of meter and the
password (which is indicated on the CD-ROM label) and confirm with “Add” (see Fig.
48)
Fig. 48: Insertion of initial password