HT instruments HT7052 - Manual (Page 32)

HT7052
EN - 30
7 MANAGEMENT OF MEMORY DATA
7.1 SAVING, RECALL AND CLEAR MEASUREMENT RESULTS
SAVING DATA
1. With measurement result displayed press MEM key. The screen of Fig. 47 is shown by
the instrument
SAVE CLR RCL nnnn
Fig. 47: Saving data
2. Use the arrow keys  or  and select the “MEM” option. The “nnnn” number shows
the memory location where the data will be saved
3. Press again MEM key to confirm the operation. A double acoustic signal is given by the
instrument
RECALL SAVED DATA
1. Press MEM key, use the arrow keys  or  to select the “RCL” option and confirm
again with MEM key. The last saved data is shown at display
2. Use the arrow keys or  to select and display the saved data correspondent to the
previous memory locations
3. The recalled data with “G” indication means the presence of a graphical screen more
than the numerical. Press SELECT key to display the graphical screen and ESC to
return to the numerical one
4. Press ESC key to exit from the function and return in measurement mode
CLEAR RESULT
1. For clear all internal memory select the “Memory clear” parameter (see § 5.2), press
SELECT key and confirm with MEM key
2. Press ESC key to exit from the function
3. For clear the last saved result press MEM key, use the arrow keys  or  to select the
“CLR” option and confirm again with MEM. A double acoustic signal is given by the
instrument to confirm the operation