GW Instek GPI-700A Series HSB-001-01/-02 User manual - Manual (Page 9)

SCANNER BOX HSB-001-1/2
USER MANUAL
12
HSB-001-2
HSB-001-2 and GPI-745A
SCANNER BOX HSB-001-1/2
USER MANUAL
13
6. MAINTENANCE
The following instructions are used by qualified person only to
avoid electrical shock, do not perform any service other than
contained in the operation instructions unless you are qualified to
do so.
6-1. Fuse Rating and type
If the fuse blows, the product will not operate. Try to
determine and correct the cause of the blown fuse, then
replace the fuse with correct rating and type shown as below:
Line
voltage
Range Fuse
Line
voltage
Range Fuse
115V 97-130V
T1.25A
250V
230V 207-250V
T0.63A
250V
WARNING. For continued fire protection, replace
only with 250V fuse of the specified type and rating,
and disconnect the power cord before proceeding fuse
replacement.
6-2. Cleaning
To keep the instrument clean, wipe the case with a damp
cloth and detergent. Do not use abrasives or solvents.