GW Instek GPI-700A Series HSB-001-01/-02 User manual - Manual (Page 5)

SCANNER BOX HSB-001-1/2
USER MANUAL
4
When line voltages are changed, replace the required fuses
shown as below:
Line
voltage
Range Fuse
Line
voltage
Range Fuse
115V 97-130V
T1.25A
250V
230V 207-250V
T0.63A
250V
WARNING. To avoid personal injury, disconnect
the power cord before removing the fuse holder.
WARNING. This is a Class A product. In a
domestic environment this product may cause
radio interference in which case the user may be
required to take adequate measures.
WARNING. During the testing, do not touch the
tested object or any other connected objects.
3-3.Environment
The normal ambient temperature range of this instrument is
from 0° to 40°C (32° to 104°F). To operate the instrument over
this specific temperature range may cause damage to the
circuits.
Do not use the instrument in a place where strong magnetic or
electric field exists as it may disturb the measurement.
SCANNER BOX HSB-001-1/2
USER MANUAL
5
4. PANEL INTRODUCTION
4-1. Front Panel
1. Power Switch ON/OFF Switch
2. High Voltage
and High
Current Status
Indicators
These LED’s indicate the status of each
individual output. When the red LED lights
which indicates the output is set to High
(high voltage of HSB-001-1/2 and high
current of HSB-001-1), while the green LED
lights which indicate the output is set to Low
(return and Source-, Sense-).