GW Instek AFG-2225 Quick Start Guide - Manual (Page 41)

Quick Reference
39
3. Couples the amplitude and offset between both
channels. Any changes in amplitude in the
current channel are reflected in the other
channel.
Tracking
Example: Tracking
1. Press UTIL, Dual
Chan (F4) to enter the
coupling function.
 ualhan
2. Press Tracking (F3),
ON (F2) to turn on
the tracking function.
rakn n
3. When tracking is turned on, parameters such as
amplitude and frequency from the current
channel are mirrored on the other channel.