Fire-Lite PS-Tools MS-9200UDLS User Manual
Page 95
PS-Tools User Guide
198 Pt Addr. Panel
PS-Tools
08/2010
89
•
In the Event Codes tab, you can view the information such as values configured to
upload or download, details on central station, event codes description, active value,
and restoral.
2.Under Download to Panel, you can select any of the following configuration data option and then
click Download to Panel.
Table 6-1
Download Options
Options
Function
Point Programming
Download point programming information to
the fire panel
DACT
Download DACT information to the fire
panel.
Event Codes
Download event information to the fire
panel.
Zones
Download zone information to the fire panel.
System Programming
Download system programming information
to the fire panel.
Options
Download option modules information to the
fire panel.
ANN-Bus
Download ANN-Bus information to the fire
panel.
Date and Time
Download date and time information to the
fire panel.
•
You must enter the time in Download
Date and Time dialog box, to set the
download time.
•
Specify and/or verify the time, and
then click OK.
3.
Click Manual Evacuate to generate a Drill Activated Trouble at fire panel. The Drill Activated
trouble sounds all Silenceable devices and NACs connected to the FACP.
4.
Click Restore Evacuate to clear the Drill Activated trouble and restore the fire panel to Normal
state. The sounding of the Silenceable devices and the NACs continues. Press Signal Silence
button in the fire panel keypad to stop the sounders and NACs.
5.
Click Trouble Silence to silence all the trouble events in the fire alarm system.
6.
Click Clear History to clear all the History data in the fire panel. For more information about
History Data, see
7.
Click Clear Display to clear the display of the status information in PC Panel
Communication Status.
8.
Click Close to close the Upload/Download dialog box after the upload/download process is
completed.