Mechanical adjustments to the printer, Setting the basical top margin and l/r adjustment, Mechanical adjust- ments to the printer – Fire-Lite PRN-6 Reference-Manual User Manual
Page 64
Mechanical adjustments to the printer
3-14
Mechanical adjust-
ments to the printer
You have the possibility of adjusting the paper detection light barriers within
this test menu.
With the help of this menu option you can compensate for mechanical and
opto-electrical tolerances in paper handling. You are allowed to shift printing
by 1/72 inch steps downwards or upwards. The default setting is 3/72 inch.
Only set a new parameter if you notice that the printing starts before the
physical page start.
Setting the basical top
margin and L/R adjust-
ment
Insert the fanfold paper and set the Paper Path Selection Lever to Tractor
mode. Put the printer into this Test mode by pressing the keys 1, 2 and On-
line while switching on the printer as shown below for about three seconds.
The printer starts initializing.
Key 1 Key 2
The display indicates Loading Defaults.
The paper is fed to the TOF position automatically, and printer prints the ho-
rizontal bar line. The display changes to:
Setup
T2240/24
Initializing...
Online
BACK
QUIT
?