Fire-Lite PRN-6 Reference-Manual - Manual (Page 52)

Test functions and hardware settings
3-2
Test functions and
hardware settings
Various tests to check proper operation of the printer are available at any
time. With these tests it is possible to check the print quality, proper operati-
on of the printhead and the mechanics, as well as efficient data transmission
from the computer to the printer.
This test menu contains three test functions ASCII 80, ASCII 136 and H-
Dump. Menu option “Formlen” allows you to define the basic form length set-
ting. Furthermore, you may select line wrap (“Wrap”) and sound when paper
is empty (“Sound”). “CX-bid” controls the bidirectional setting
of the parallel
interface
Enter Test mode by pressing the key Online while switching on the printer.
Hold the key Online for about three seconds.
ASCII80 ASCII136
Back Exit
H-Dump
Back
Exit
Forml
Back Exit
Wrap Sound
Back Exit
CX-Bid CX-IF
Back Exit
ChTrFr
Back
Exit
ASCII test with 80 or 136 characters per line
Interface test
Setting the form length
Setting line wrap and sound when paper empty
Setting for bidirectional I/O processing
and interface mode
ractor friction Setting for t
BACK QUIT
?