Fire-Lite PRN-6 Reference-Manual - Manual (Page 18)

Save settings Once the desired parameter is displayed on the LC display, you can save it
by pressing the Set key. The parameter is then set and the printer automat-
ically displays the parameter groups again. With the Exit key you can
leave the sublevel without saving your changes (see also
Terminating
Menu mode, page 1-6).
Example:
Back to the
previous
parameter groups On to the next
parameter groups LPI Skip
Back Next
6 LPI *
Set < > Exit
Skip = 0.0 Inch *
Set < > Exit
1
4
Programming via the control panel
1 - 11
BACK QUIT
?