Fire-Lite PRN-6 Reference-Manual - Manual (Page 41)

✔ ✔ _<0> overscore mode OFF
✔ ✔ ✔ ✔ 0 Set line feed to 1/8 inch
✔ ✔ ✔ 1 Set line feed to 7/72 Inch
✔ ✔ ✔ ✔ 2 Set line feed to 1/6 inch
✔ ✔ 2 Set line feed to n/72 inch
✔ ✔ 3 Set line feed to n/180 inch ( = 0 - 255)
✔ ✔ ✔ 3 Set line feed to n/216 inch ( = 1 - 255)
✔ ✔ 4 italic mode ON
✔ ✔ 4 setting top of form
✔ ✔ 5 italic mode OFF
✔ ✔ 5<1> automatic line feed ON
✔ ✔ 5<0> automatic line feed OFF
✔ ✔ 6 print ASCII codes 128 to 159
✔ ✔ 6 character set 2 (extended)
✔ ✔ 7 suppress ASCII codes 128 to 159
✔ ✔ 7 character set 1 (Standard)
✔ 8 paper end detector OFF
✔ 9 paper end detector ON
✔ ✔ a select justification and centering mode
=
0 ➵ left justification
1 ➵ centered
2 ➵ right justification
3 ➵ left and right justification
✔ ✔ A Set line feed to n/60 inch ( = 1 - 127)
✔ ✔ ✔ A Set n/72 inch line feed ( = 1 - 85)
✔ ✔ b<0> clear all tab settings
✔ ✔ b<0> set vertical tabs in channels = 0 - 3
= 1 - 154
✔ ✔ ✔ ✔ B<0> reset all vertical tab stops
✔ ✔ B..<0> set vertical tab stops
✔ ✔ B..<0> set vertical tab stops
✔ ✔ ✔ ✔ C<0> set form length in inches ( = 1 - 22)
✔ ✔ ✔ ✔ C set form length in lines ( = 1 - 127)
✔ d set relative horizontal step
Formula: n = relative print position
= INT (n/256)
= n MOD 256
IBM IBM Epson Epson IBM-
MTPL Propr. Propr. FX850 LQ850+ AGM Code Function
XL XL24 FX1050 LQ1050+
List of available control codes
2 - 12
BACK QUIT
?