Edwards Signaling 116DEXSTC-FJ - Manual (Page 2)

P/N 3100759 ISSUE 1
Figure 2. Detail of Pendant Mounting Figure 3. Detail of Ceiling Mounting
Figure 4. Detail of Wall Bracket Mounting Figure 5. Detail of Stanchion Mounting
12"
12 3/4"
7 1/4"
1"
13"
13 3/4"
7 1/4"
5/16"
4"
4"
6 3/4"
1/4"
1 1/4"
Conduit
13 1/4"
12 3/4"
13 1/2"
Figure 6. Wiring Diagram
NOTE: For non-fire alarm use, i.e. without field wire supervision, installer can tie the two white leads
together and tie the two black leads together.
5/16"
4"
4"
6 3/4"
1"
12 9/16"
9 7/16"
16 1/16"
16 13/16"
NOTE: DC polarity of circuit shown in supervisory state (signal inactive). Circuit polarity to reverse to activate signal.
Electrical supervision requires wire run to be broken at each device.
Device for constant input voltage. Do not connect to “coded” or pulsating voltage.
From Power Source
or
Previous Signaling Device
End-of-Line Resistor,
when required with
supervised system
KEY:
Light symbol -
Wire nut symbol - (+)
White
(+)
White
(+)
White
(+)
White
Black
(-)
Black
(-)
Black
(-)
Black
(-)
Series
116DEX
Series
116DEX
(+)
(-)
NOTE: Not for use as a Public Mode Fire Alarm
Signal