Edwards Signaling 435EX User Manual
Description, Installation, Electrical specifications

Class
Zones
Divisions
Groups
I
1 and 2
B, C and D
I
1 and 2
IIA and IIB
II
1 and 2
E, F, and G
III
1 and 2
VIBRATING BELLS
AC
DC
CAT. NO.
RATED
VOLTAGE
50/60 HZ
CURRENT
(RMS)
CAT. NO.
RATED
VOLTAGE
CURRENT
340EX-6G5
24V AC
0.21A
435EX-6C1
6V DC
1.52A
340EX-10G5
24V AC
0.21A
435EX-6E1
12V DC
0.52A
340EX-6N5
120V AC
0.041A
435EX-10E1
12V DC
0.52A
340EX-8N5
120V AC
0.041A
435EX-6G1
24V DC
0.21A
340EX-10N5
120V AC
0.041A
435EX-8G1
24V DC
0.21A
340EX-6R5
240V AC
0.021A
435EX-10G1
24V DC
0.21A
340EX-10R5
240V AC
0.021A
435EX-6K1
48V DC
0.11A
435EX-8K1
48V DC
0.11A
435EX-6P1
125V DC
0.040A
435EX-8P1
125V DC
0.040A
435EX-6S1
250V DC
0.023A
435EX-8S1
250V DC
0.023A
SINGLE STROKE BELLS
AC
DC
CAT. NO.
RATED
VOLTAGE
50/60 HZ
CURRENT
(PEAK)
CAT. NO.
RATED
VOLTAGE
CURRENT
(PEAK)
332EX-6G5
24V AC
3.4A
333EX-6G1
24V DC
3.5A
332EX-10G5
24V AC
3.4A
333EX-10G1
24V DC
3.5A
332EX-6N5
120V AC
0.43A
333EX-6P1
125V DC
0.52A
332EX-10N5
120V AC
0.43A
333EX-6S1
250V DC
0.26A
332EX-6R5
240V AC
0.20A
332EX-10R5
240V AC
0.20A
NOTE: The first one or two numbers following the dash in the catalog number designate
the gong size, i.e., 340EX-6G5 is a catalog series 340EX bell with a 6" gong.
Description
Description
Description
Description
Description
Edwards Catalog Series 332EX, 333EX, 340EX and 435EX
Adaptabel Bells are heavy duty, UL listed audible signal-
ing appliances intended for use in hazardous locations.
The 332EX and 333EX series are single stroke bells suit-
able for use in coded signaling applications such as tim-
ing, scheduling, paging, or alarm. The 340EX and 435EX
series are vibrating bells suitable for use in general sig-
naling and alarm applications. The 332EX and 340EX se-
ries are ac-powered and the 333EX and 435EX series are
dc-powered. The bells are electromechanical devices and
utilize solid state components. They are Outdoor Type 4
listed. All series of the bells are listed for installation in
the following hazardous locations:
Installation Instructions for Catalog Series 332EX, 333EX, 340EX
and 435EX Adaptabel Bells for Use in Hazardous Locations
Mechanical Specifications
Mechanical Specifications
Mechanical Specifications
Mechanical Specifications
Mechanical Specifications
Dimensions
With 6" gong ...... 7" (178 mm) H x 5" (127 mm) D
With 8" gong 9" (229 mm) H x 5 1/8" (130 mm) D
With 10" gong11" (279 mm) H x 5 1/4" (133 mm) D
Weight
With 6" gong ....................... 5 1/4 pounds (2.4 kg)
With 8" gong ............................. 7 pounds (3.2 kg)
With 10" gong ..................... 8 1/4 pounds (3.8 kg)
Installation
Installation
Installation
Installation
Installation
The following items (not supplied) are required for instal-
lation of the bell:
• 3/4" conduit to contain power supply and ground wires
• One 3/4" NPT nipple
• One conduit outlet box suitable for use in the hazardous
location
• Two fasteners up to 3/8" diameter and washers suitable
for securing bell to mounting surface.
• Two wire nuts.
The bell can be mounted to any solid surface. Install bell
as follows:
1.
See Figure 1. Remove cover from conduit outlet box.
Feed the two wires from the applicable power source
Figure 1. Installation Wiring
Electrical Specifications
Electrical Specifications
Electrical Specifications
Electrical Specifications
Electrical Specifications
P-047550-0585 ISSUE 6 © 2005
CHESHIRE, CT 203-699-3300
CUST. SERV. FAX
203-699-3365
TECH SERV. FAX
203-699-3078