Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger - Manual (Page 33)

32
File Formats
Space delimited ASCII text
DATE TIME AM/PM CHAN TEMP
°
F/
°
C
Installation
1. Connect a communications cable between your PC and
the meter according to the diagram next page.
2. Start Windows 95.
3. Insert disk into drive A or (B).
4. In Windows 95 chose RUN from the Start menu.
5. Type A:\setup (or B:\setup) and click OK.
5. The Installation Wizard will guide you through the
remainder of the installation procedure.
After launching the program, your instrument and PC should
communicate. If your unit is not communicating ensure the
serial communications cable is wired correctly and the
proper COM port is selected.
Note: Once communications is established, the PC
has control of the instrument and the front panel
keys become non-functional. In order to regain
control of the front panel the software program