Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger - Manual (Page 14)

13
The following menu items are displayed only when the
appropriate option is installed-
5. ALM1/ALM2:
Sets relay trip points to a
programmed value as well as other alarm
related parameters
6. AOUT: Programs the indicator to translate the
display to a proportional analog output signal
7. MULT:
Configures indicator for multiple same
type input sensors
Pressing the PGM key allows you to access any of the menus
listed above by placing the indicator in program mode,
indicated by a ‘P’ lit to the right of the display. Placing the
indicator in PGM mode will prevent the indicator from
performing measurements. Any alarm monitoring will be
disabled.
If the PGM key is pressed anywhere within a menu,
the menu reverts to the previous menu level. Repeatedly
pressing the PGM key will return the indicator to the display
mode. Choices within a menu are viewed by pressing the
ARROW key. A menu item is selected by pressing the ENT
key for selection, or edited by pressing the ARROW key.
Generally, the ARROW key allows you to scroll horizontally
through a selection of choices while the ENT key enables you
to make selections and move down vertically to the next menu
item.
If the alarm option is installed and the alarm relays